Lithofin MN Easy-Clean

//Lithofin MN Easy-Clean

Lithofin MN Easy-Clean


A special product from the LITHOFIN-Range for marble, natural and engineered stone (MN). Lithofin MN Power-Clean is free of solvents, low in odour and economical in use. It is a mildly alkaline cleaner, which contains a balanced mixture of cleaning components which guarantee optimal performance.

Safety Data Sheet
Safety Data Sheet Technical Data Sheet
SKU: LFMECLN Category:



Highly active components dissolve dirt, oil and grease and allow for easy and streak-free cleaning. Special additives ensure that the protective effect of impregnators is not diminished with regular use. The surface will therefore remain protected for a long time. Lithofin MN Easy-Clean leaves a pleasant odour.

Technical Data:
Density: ca. 1.0 g/cm³
pH-Value: approx. 8
Appearance: liquid, colourless, clear
Odour: fresh
Solubility in water: good, complete

Field of Use

For regular, every-day cleaning of all small natural stone and quartz surfaces such as kitchen work tops, table tops and in sanitary areas. Specially formulated for use on marble and limestone. Also suitable for ceramics, glass and plastic surfaces.

Directions for Use

Spray Lithofin MN Easy-Clean on the entire surface. Allow the product to work briefly, then wipe the surface with a cloth. Surface may have to be buffed with a dry cloth.
Please Note: do not spray on hot surfaces.
Coverage: up to 20m² per bottle.
For more stubborn dirt we recommend Lithofin MN Power-Clean.


Cool and closed. Not above 25°C; can be stored for up to 3 years.


Natural stone floors should be cleaned regularly with Lithofin MN Easy-Care.

Environmental Protection

Surfactants are biologically degradable according to WRMG. Does not contain phosphates. Bottle is made from environmentally friendly polyethylane and can be recycled. Empty containers which are clean or have dried out may be recycled through collection systems. Please see label for details.


Keep out of reach of children. No health concerns according to LGA Nuremberg. Ingredients: < 5 % anionic surfactants, auxilliary agents.
Labeling according to VO(EG) Nr.1272/2008(CLP): none.

Additional information is listed on the Material Safety Data Sheet.
ADR2015: Labeling for transport

Unit Label Notes on freight papers
a,b, none

a) 500ml-bottle with Sprayer (10 per box)
b) 1 litre refill-bottle (10 per box)
Please Note: statements concerning environmental and safety issues refer to the product as delivered (concentrated).
This information should be considered to be informal and non-binding.
The products must be used according to local conditions and materials.
Always test the product in an inconspicuous area. (AUS/NZ2.16gps/6.15)

Additional information


500ml, 1 Litre